no rom basic

royston hill wrote: Umm, perhaps I missed part of this thread, but the procedure is fairly simple . . . NO ROM BASIC means "no bootable operating system found." 1) Boot from a floppy which also has fdisk.exe and format.com on it. 2) After boot, run fdisk and DELETE any existing partitions. 3) Create a new, single partition which utilizes the entire drive and answer YES when asked if you want to make the partition active. 4) Exit fdisk. 5) Reboot from the floppy drive. 6) Execute the command FORMAT C: /S 7) Remove the disk from the floppy drive. 8) Reboot, and you should get a C: prompt. If not, check for viruses and try again. 9) If still no success, make sure the drive is properly configured (as "master" or "single drive" depending on your configuration). Also make sure that the CHS values have been properly entered into your system BIOS. 10) If still no success, try a different drive. Regards, Glen Goodwin 0/0