6 Feb
2002
6 Feb
'02
11:27 a.m.
On Feb 6, 19:40, Steve Robertson wrote:
The system has a hard drive, dual floppies, and 4
serial ports (plus
console) on the rear panel. I hooked up a terminal and am able to talk to
the system. However, when it tries to boot but gives a message:
"DEVICE TT001: Not in configuration"
"RSX 11M V 4.1 BL35E 1024K mapped"
It stops at that point and won't go any further. I can ^C and get a "MCR>
prompt" and talk to the system but it won't *do* anything.
Am I doing something wrong or is this the expected behavior when the OS
is
broken?
Nice find. It's ages since I ran RSX-11M, but I thought TT001: was the
console. Hmm. Maybe TT000: is the console, in which case it's telling you
the first additional serial line is missing. Could be a card (likely a
DLV11-J or a DZV11 if there are 4 D-connectors) missing, or misconfigured
since the system was last booted. RSX-11M is picky about missing hardware.
--
Pete Peter Turnbull
Network Manager
University of York