On Jan 6, 2012 6:09 PM, "Chris Elmquist" <chrise at pobox.com> wrote:
Can you boot from ANY MSCP controller even if it is third party such
as CMD as long as you have the correct ROMs?
If you just use the BOOT command or configure for auto boot there are
probably restrictions on how the CSR addresses and device unit numbers are
configured for the MSCP controllers.
If necessary both the KDF11-B and KDJ11-B firmware should let you specify a
non-standard CSR address using the BOOT command with the /A option as
documented in the manuals.
I haven't had any problems booting from Dilog and CMD SCSI SCSI controllers
and Dilog and Emulex ESDI controllers using the standard KDF11-B and
KDJ11-B firmware MSCP boot.
-Glen