17 May
2009
17 May
'09
8:05 p.m.
Josh wrote....
Maybe... it might be close enough -- what's the
diagnostic program # for
setting drive options listed in the quick reference? I can try it on my
9905 and see if it lets me set parameters, if it does then it may be
what I need...
Program # 09 select high speed mode
Program # 10 select low speed mode
Program #27 select 800bpi
Program #28 select 1600bpi
Program #29 select 3200bpi (error code 98 means 3200 not available)
Program #30 rewind tape
Program #40 display prom rev No's
Program #11 Set 'n'
Program #18 write 'n' short records stop/start mode
See if those are close....
Jay