second try ... it seems like Outlook Express settings are still not ok ...
Hope this post is more readable!
---
Hi all,
Last week I hired a truck to pick up a "few" things ...
- H960 rack with PDP-11/45 and a Cypher 100 tape drive
("not working" sticker attached to the Cypher)
- H960 rack with PDP-11/55 with 28k fast memory
(according to the post-it attached to it)
- H960 rack with TU45 ("seems complete" says the post-it)
- H960 rack with TU16 (capstan rooler is goo)
- H960 rack with communications stuff (see below)
- two RK07 disk drives
- RM03 disk drive
- RM03P disk pack with diagnostics
- two DECprinter I
- DECwriter II
- cabinet with SYSTIME SYSTAPE II unit (capstan also goo)
- a few boxes, one contains a complete RH11-AB
- RT-11 V5.4 SRC micro fiche (#1 - #86)
in two envelopes complete with the Bill of Material!
- complete RT-11 V4 manual set in blue binders
- complete RT-11 V5 manual set in orange binders
- Bell & HOwell micro fiche reader in an attache suitcase
Needless to say that my wife was not so glad when I got home :-)
I took pictures while unloading, and they will be on my website,
probably a good moment to do that are the Xmas holidays ...
I plan to get rid of most of this, and use parts to get other
units in my collection restored into working order. The 11/45
will go to Edward, the 11/55 is a great addition to my UNIBUS
machines collection.
Most of the stuff will probably be too heavy to ship ...
I disassembled the BA-11F with the comm stuff. The complete
power harnass is for whom it wants/needs. I can take pictures.
The BA11 contained two DR11-B 4-slot backplanes, populated with
M7219, M208 (2x) M7821, M796, M205, M^11 (2x) M112, M113, M239
and an M9680 DR11-B test connector board, power 'paddle' board,
and connector board M9760 with two cables attached to it with
on the other end one connector board (single height) M908?
That single height connector board went into a small rack-mount
unit with a 2-row backplane containing the folowing boards:
M5950 (8x), M3020 (3x), M205 (5x), M111, M112, M306, M611 and
one onit has M113 (3x) and the other unit has M113 (1x) and
M1131 (2x). One unit was marked "RX", the other was marked "TX".
On the side of the backplane is a label with this text:
DIGITAL CSS P/N 2M-C121A S/N NU00001 DX40AB.
The other unit has the same lable, but S/N is NU00002!
Each unit has its own power supply, H716A.
I elaborated a bit more about the comm stuff, because I really
don't have a use for it, unless dismantling it. So, if somebody
wants this (DR11-B or DX40 or everything), let me know.
I have no idea what the things weigh, so neither do I know what
the shipping costs would be. Free pick up in The Netherlands :-)allthough recovering some
money from hiring the truck would be nice.
I am also looking for two buttons of the TU45. They are damaged.
It's the lower two on the control panel, "FILE PROT" and
"1600BPI".
thanks,Henk