15 Jul
2012
15 Jul
'12
7:30 p.m.
Date: Sun, 15 Jul 2012 13:23:38 +0200
From: Camiel Vanderhoeven <iamcamiel at gmail.com>
To: "General Discussion: On-Topic and Off-Topic Posts"
<cctalk at classiccmp.org>, "General Discussion: On-Topic Posts Only"
<cctech at classiccmp.org>
Subject: Dilog and ACT UNIBUS module identification
Message-ID:
<CA+0-H5QfbaQUMRa8zK7N91Bft+NVJqkZhD6y+kCARnC2NjPkKg at mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1
I can't find anything on these two UNIBUS modules:
- ACT 10197-0
- DILOG 153078
I believe a Dilog DQ153 is a Pertec-formatted mag tape controller.
I used one in my system. The label you are reading is probably
the blank board part #, there should be a silkscreen label on
the front of the board.
Jon