19 Feb
2002
19 Feb
'02
5:44 a.m.
-----Original Message-----
From: Jerome Fine [mailto:jhfine@idirect.com]
> Speaking of iomega hardware in the basement...
:)
> I have a 1/4 length 8-bit ISA board that looks like a SCSI
> controller, and is stamped with the iomega logo. Anyone know
> what it might be, or where to get drivers?
When I first found an Iomega SCSI internal Zip 100
drive, it
included an ISA Adaptec AVA-1502 board which measures
5 1/4" by 1 3/4". There is one "exposed" 50 pin male header,
one major chip about 1" square and a couple of other bits.
It works VERY well on a Pentium 166 MMX using W95.
The dimensions are quite a bit different on this board -- It's
taller. It also has a DB25 plug.
Is your board marked as Adaptec? This one isn't... Also, is
your board 8-bit ISA? :)
Chris
Christopher Smith, Perl Developer
Amdocs - Champaign, IL
/usr/bin/perl -e '
print((~"\x95\xc4\xe3"^"Just Another Perl
Hacker.")."\x08!\n");
'