20 Sep
2001
20 Sep
'01
11:35 p.m.
hi,
On Fri, Sep 21, 2001 at 02:59:46AM -0400, r. 'bear' stricklin wrote:
1) Power on the machine.
2) Wait approximately ten minutes.
3) Press 'reset'.
4) Wait a further thirty seconds.
5) Type <CTRL>-V on the console keyboard. The machine should beep.
6) Type '1' to set the video system to 70 Hz sync or '2' for 60 Hz.
additionally, the default mode for the serial console (which the system
will automatically use if there is no keyboard plugged in at power-on) is:
9600-E-7-1
Good luck. Hopefully this will help somebody get his Aviion going.
thank a lot. this solved my problem, card was set to 70 Hz instead of 60 Hz
suitable for Sony GDM 1601/8. now it is working fine, i did it through serial
console.
but.. (yes, another but ;)) i got this machine without any keyboard. connector
looks like PC DIN one but has more pins, i have no DIN keyboard here now to
test it so i want to ask if it will work and if not, what for a keyboard i
need to have (or is there any hack possible?), thanks
regards,
--
-- salo <salo(a)Xtrmntr.org> ASCII Ribbon campaign against /"\ --
-- <salo(a)silcnet.org> e-mail in gratuitous HTML and \ / --
-- Microsoft proprietary formats X --
-- http://Xtrmntr.org/salo.pgp / \ --