-----Original Message-----
From: cctalk-bounces at
classiccmp.org [mailto:cctalk-
bounces at
classiccmp.org] On Behalf Of Paul Anderson
Sent: 16 July 2012 02:36
To: General Discussion: On-Topic and Off-Topic Posts
Subject: Re: Ready to Power up the 11/04
BA11-K (H765) or BA11-L (H777)? The H765 are easier to work on and the
parts are easier to find.
Paul
On Sun, Jul 15, 2012 at 4:06 PM, Rob Jarratt <robert.jarratt at ntlworld.com>
wrote:
I picked up an 11/04 this weekend, thanks to the
generosity of another
list member. It has a known faulty PSU, although I don't yet know if
it produces any output at all or not. Any tips on common failures?
Regards
Rob
-----Original Message-----
From: cctalk-bounces at
classiccmp.org [mailto:cctalk-
bounces at
classiccmp.org] On Behalf Of Andrew Quinn
Sent: 14 July 2012 10:15
To: cctech at
classiccmp.org
Subject: Ready to Power up the 11/04
I have the power supply tested and reassembled and am ready to power
up the 11/04.
I am looking to limit the number of installed boards initially.
Certainly the RK05 controller boards can go as I haven't got the
drives operational yet.
The configuration of the 11/04 as I received it is as follows
(hopefully
this is
> readable):
>
> M7257 M7257 M9302
> M7256 M7256 -
> M7255 M7255 -
> M7254 M7254 M920
>
> M7258 M7258 M920
> M7856 M7856 -
> M7860 M7860 -
> GRANT M9202
>
> GRANT M9202
> M7856 M7856 M7850
> GRANT
> M7847 M7847 M7847
> GRANT
> M7847 M7847 M7847
> M7859 M7859 M9301
> GRANT
> M7263 M7263 M7263
>
> Looking for some guidance if the following is a valid configuration:
>
>
> GRANT M9302
> M7856 M7856 M7850
> GRANT
> M7847 M7847 M7847
> GRANT
> M7847 M7847 M7847
> M7859 M7859 M9301
> GRANT
> M7263 M7263 M7263
>
> I am also looking to confirm my understanding of the M9301 card. I
> have read the maintenance and operators manual for the M9301. I
> think it is saying that the Console Emulator startup message from the
> M9301 and the console emulator commands will be available on the
terminal...
> which I take to mean the terminal connected
to the M7856 in this
machine.
>> Am I understanding that right.
>>
>> Thanks everyone for your help.
>>
>> Regards
>>
>> Andrew
>