It's ALIVE!!! (Mark-8)

I bought one of the Mark-8 (8008) board sets from eBay 2 or 3 weeks ago, scrounged up all the parts, and set to work. It had non-plated-through holes so almost all the components had to be soldered on both sides of the board, and there were dozens of vias that had to be soldered in on each board as well. Did the smoke test with no CPU. No smoke, so I inserted the CPU, and it works! I found two problems on initial testing. There was a bad gate in a 7404 which was pulling down one of the data lines (replaced it), and I had missed a "top bus" jumper from the address/multiplex board to the memory board which allowed writes to memory (added a wire). That was it! It's pretty cool - just toggled in a test program and watched the lights blink as it looped over and over. Now I have to build a case and find a better power supply than my bench supply for permanent use, and then I start wire-wrapping an ELF! Whee!