10 Sep
2014
10 Sep
'14
10:27 a.m.
I mentioned to Glen off list that though my unit had the 16505 which
supports the emulators my unit was using the 16505 just for uploading
the analyzer data. They had a bunch pattern generators in the box, an
oscilloscope card, and what I am guessing is a matching number of state
/ timing cards.
One could use a third party jtag to test a board with such a setup.
Emulators didn't support test jtagging all that well, and there was not
an HP unit with this analyzer.
The Boat Anchor Archive used to have a discussion group, you might look
around to see if they have thought about that, or know of others who
might have those files.
thanks
jim
On 9/10/2014 9:53 AM, Sean Caron wrote:
Has anyone archived Inverse Assemblers for various HP
LAs anywhere? I'd
love to get the inverse assemblers for a few selected CPUs (68000, 6809,
6502, Z80, ...) for my 1662A. Just stuff I'd be fooling around with while
breadboarding.
Best,
Sean
On Wed, Sep 10, 2014 at 12:24 PM, Glen Slick <glen.slick at gmail.com> wrote:
The 16500A version 6.00, 16500B version 2.03 and
3.14, and 16500C
version 1.09 operating systems can currently be downloaded from the
Keysight website.
What are more interesting to archive are Configuration and Inverse
Assembler disk images for various probes.
-Glen
On Tue, Sep 9, 2014 at 11:54 PM, Rik Bos <hp-fix at xs4all.nl> wrote:
IIRC the A uses LIF and the B and C version uses
FAT. But little search
would provide you with the downloads for the operating
software. Search on
the Keysight (Agilent) website.
> -Rik