21 Jun
2003
21 Jun
'03
12:51 p.m.
At 05:17 PM 6/21/03 -0700, you wrote:
On Sat, 21 Jun 2003, Joe wrote:
There's only one way to find out!
Joe
I would try making a hole with a heated pin or
something like that. Or
you might try punching a hole with a piece of small diameter hollow tubing
after sharpening the end of the tubing. Alternatively you might try
blacking out the clear spot with a magic marker or something like that.
That way you could use the original holes. Let me know what you find out.
I'v ehad the same problems and I've been meaning to try some different
things but never got around to it.
Joe
The possible problem that I see with the heated pin is the
likelihood of leaving a raised 'donut' from melting the mylar that
could interfere with proper spooling of the tape.
- don