25 Feb
2009
25 Feb
'09
12:17 p.m.
On Wed, Feb 25, 2009 at 11:51 AM, Tobias Russell <toby at coreware.co.uk> wrote:
I successfully built a 300MB disk image under simh from the BSD 2.11
tape and then copied this onto the SCSI disk with:
dd if=bsd211.dsk of=/dev/sda
However, when I put the disk onto the -11 and try to boot DU0, it just
hangs.
What SCSI controller are you using on the PDP-11?
If I remember correctly you need a patch on top of the standard
2.11BSD distribution to boot using a CMD-CQD223.