25 Jul
2000
25 Jul
'00
12:44 p.m.
Hi,
The White wire goes to the silver terminal on the plug.
The Black wire goes to the gold terminal on the plug.
The Green wire goes to the green terminal on the plug.
If your plug doesn't have silver, gold and green, buy a new
plug.
Also, make very sure about the expected voltage. I had purchased
a 220V twist lock plug, and completly installed it before thinking
to check if the rack was 110V or 220V. Fortunately, I discovered it
was a 110V 30A plug I needed before plugging it in (and killing
three harddrives, controller, and an STC 9-track tape drive).
clint
On Tue, 25 Jul 2000, Lawrence LeMay wrote:
My PDP 8/e has its power cable cut off. The wires are
color coded White,
Black, Green. This is for a Dec H724 power supply.
Does anyone have any schematics or doc that would tell me how to connect
those 3 wires to a power plug? Its about time I powered this thing up
to see if the capacitors are working. I dont have an electronics
test bench, so i'll just have to pull the boards out and turn it on,
and hope for the best.
-Lawrence LeMay