14 Jul
2012
14 Jul
'12
7:28 a.m.
On 07/13/2012 07:24 PM, Adrian Stoness wrote:
Thanks Allison & Others.
First of all I did not disable any device in simh, hence the message.
Of course, after disabling the unwanted drivers, it did not report
the message anymore. I'll have a look at the emulated code and add/change
the 'revision' levels.
--
Dit is een HTML vrije email / This is an HTML free email.
Zeg NEE tegen de 'slimme' meter.
do u have a tk50 tape drive?
On Fri, Jul 13, 2012 at 12:55 PM, Wadoco <quapla at xs4all.nl> wrote:
read the Introduction to RT-11, and the Installation Guide which
contain much of the information you need to use RT-11 Version 5.7.
.R MSCPCK
?MSCPCK-I-MU0-TK50 FW Rev Level is 005/HW Rev Level is 001
?MSCPCK-W-TUK50 controller below FW Rev 4/HW Rev 2
.
=======
Anybody have a suggestion about the last 2 error messages?
and can it be easily fixed in the simh code?
Ed
It's a mismatch between the driver and the device for revision level.
While it can be fixed in simh it could also be an OS issue.
Also the first message is -I- meaning informational, the second is a
-W- or warning suggesting there may be issues. there was no fail -F-
so it will operate but there may be issues around TK50 tape.
Allison