27 May
2019
27 May
'19
11:15 p.m.
On 5/27/19 9:58 AM, Rod Smallwood via cctalk wrote:
Hi
??? Whilst I wait to hear from Glen Slick who has got me this far
(Thanks Glen) I'll restate the problem.
1. I now have an old XP system with SIMH on it (PDP11.exe)
2.? I have created RD54.dsk containing RSTS/E
3. Attached to the system is a 2.1Gb SCSI drive via an adaptec 2940
controller
4. I need a tried and tested list of step by step instructions to put
RD54.dsk on the SCSI drive.
5. The drive will then be moved to a CQD-220A/TM SCSI controller on my
KDJ11-E based 11/93 and must boot.
6. Its just an image copy from one drive to another on the same system.
7. Nobody has come up with a tried and tested list of step by step
instructions yet.
Rod Smallwood
Depends on what you mean by tried and tested.
I told you to use Ersatz-11 and buld the image directly
on the SCSI drive. Ersatz-11 works fine under FreeDOS.
Disks are cheap so you just make a different disk for
your system. I have used this method to make RT-11, RSTS/E
and BSD-211 systems disks that successfully boot and run
on my 11/93 with the CQD-220A/TM controller.
You could probably boot your image under Ersatz-11 and then
copy it to the SCSI but the method above works just as well.
bill