2 May
2006
2 May
'06
7:31 a.m.
Hi
It seems like this has been mentioned before but I just
don't can't seem to find it.
I put an older 360K drive in with my 1.44M. Things seem
OK and I can use the 360K disk fine but I can't use the\
1.44M while the 360K is connected. If I remove the
26 pin connector, the 1.44 works fine.
What signal is most likely the problem from the old
360K that is stepping on the 1.44M?
I'm using this setup to transfer images for my Olivetti
M20 so it is somewhat on topic.
Dwight