26 Sep
2005
26 Sep
'05
2:35 p.m.
Subject: Re: SIMM, Address Lines Order?
From: woodelf <bfranchuk at jetnet.ab.ca>
Date: Mon, 26 Sep 2005 08:18:24 -0600
To: General Discussion: On-Topic and Off-Topic Posts <cctalk at
classiccmp.org>
der Mouse wrote:
Just that all of them gets refeshed in the alloted time.
Note they just have to be read for refesh. Still you better
check the data sheets if you got them for the fine print.
If your using cas\ only refresh then the data lines are not used
as that is done with internal refresh counter.
Tim Olmstead wrote a Z80 Dram interfacing manual thats around the net
and cover simms as well as the ram on them. Very useful. I have an
electronic copy locally if needed.
Allison
When
connecting DRAM chips to the pins of a SIMM (i.e. laying out the
traces) does it matter if the order of the address and data lines is
preserved? [...]
What about refreshes? (This is a question, not a challenge; I do not
know enough about how dynamic RAM refresh works to know whether this
really is relevant. But it seems to me that it might be.)