SIM990/DX10 help?

On 1/4/2015 12:05 PM, Sean Caron wrote: The description says that ansi terminal is required. I got a response from the emulator. I have a windows XP running Putty for my main system. I was ssh'ed into a linux system running the emulator. I compiled it and moved it to /usr/local/bin. I started with the DX10 system as Sean did. when you follow the example (with path set to /usr/local/bin and sim990 there) you get an error as the simulator cannot find the roms. I moved copies from the build directory into the dx10 directory, and ran the emulator again. I got a good message there. jws at jws2:~/nas/projects/jws-main/ti990/dx10$ sim990 -msc 12 512K dx10.cfg TI 990 Simulator 3.0.2: /12 CPU 512K To connect to the emulator, I used another putty session ssh'ed into the same linux system. Once there I used linux telnet to connect to the emulator. The ssh session will be an ANSI compatable ssh terminal emulation. Running telnet into the same system to port 2000, means that the session supports ANSI for the terminal. Once connected, I hit F10 (and then carriage return). The banner appeared. I typed the LL to elicit a response. I The "ERROR, COMMAND..." message appeared after typing ll (echoed back upper cased) then enter. Below is what I have so far. Time to read and see what should actually work. Jim ******************************************************************************** * * * DX10 3.7.0 * * * * THIS SYSTEM HAS THE FOLLOWING SUBSYSTEMS INSTALLED: * * * * COBOL 3.5.0 FOCAL 1.0.4 (REQUIRES /12 CPU) * * PASCAL 1.8.0 FORTH 1.0.2 * * SORTMRG 3.1.0 TXDS FORTRAN 3.1.0 * * BASIC 3.1.0 * * * * THIS SYSTEM HAS BEEN PATCHED FOR Y2K. * * * ******************************************************************************** LL ERROR, COMMAND OR SCROLL FUNCTION REQUIRED: