6 Nov
1999
6 Nov
'99
2:14 p.m.
There were two types of SIMMs, initially. The ones with equal numbers of
devices on both sides were viewed in some systems as being two SIMMs, but
occupying a single site. I had one motherboard which required you jumper it
differently for the double-sided variety than for the single-sided. Now,
some of the single-sided SIMM had the parity chips on the reverse side, but
were still thought/spoken of as single-sided.
You might do well scrounging around an electronics graveyard (landfill).
I've left bunches of them lying there while diving for pearls.
Dick
-----Original Message-----
From: B'ichela <mdalene(a)home.ctol.net>
To: Discussion re-collecting of classic computers
<classiccmp(a)u.washington.edu>
Date: Saturday, November 06, 1999 5:59 PM
Subject: Needed, Memory chip info for a Compaq
I am aware that this list covers Older systems than
Compaq. From
what I can see from reading this list.. someone might have an answer.
I have a Compaq Despro 386n. Currently it has 4mb of ram. I am
painfully running Slackware 3.1 on it. Does anyone know what kind of
Memory this machine is using? From what I can see, it has two Simm modules
that appear to be 72 pin. There is memory chips on both sides of these.
Does standard Simms of the 72pin variety have memory chips on both sides
of the simm?
If these ARE standard, does anyone have two 8mb ones? I want to
put 16mb of ram on the Deskpro as 4mb stinks! The Compaq only can hold two
of them unless you have the special Compaq memory expander board. If these
are specialized. again who has them inexpensivly?
Please respond either via the list or priate email to my address
above.
A pearl of wisdom from the y2K newsgroups:
-------------------------------------------------------------------------
aY2K appears to be the Baby Boomers mid-life crisis, and it has the
potential to be a dandy.
-- Anonymnous --
--------------------------------------------------------------------------
B'ichela