16 Jun
2010
16 Jun
'10
5:32 p.m.
On 17/06/10 00:23, Keith wrote:
I've done this math about a million times. :)
Absolute minimum read time: 200ms * 160 = 32 seconds.
Practical minimum w/o circular buffer support: 220ms * 160 = 35.2 seconds.
(you've got to read 12 amiga sectors(instead of 11) because you start
reading in the middle of a sector)
Hm, so that's another acq mode you could use -- start immediately, then
stop on the 13th MFM_SYNC_DETECT.
Personally I'd go with a double back-to-back read, which produces about
180K of data. You start on the first index pulse, then keep reading
through the second one, and stop reading on the first index pulse. This
would give you a seamless block, *and* tell you what the time delta from
the index pulse to the start of the track is.
On most mastered discs this may well be close to zero, but on copy
protected discs (for any platform), this kind of info may be important...
So we're talking like 37 seconds best case.
I'm doing it in around 50s,
the time that's left is
1> pc processing time (which can still be optimized) around 10ms.
2> after track finishes being read, the fifo has to finish sending to
the PC.
If the DiscFerret wasn't in pieces, I'd run a read test and post a scan
time. At the moment I'm borrowing its power supply to power a Planar EL
display panel that I'm playing with -- a surplus item that apparently
came out of a Sun StorEdge A5100. Totally off-topic, but it was made by
a Tek spinoff, looks frickin' cool compared to an LCD, and... well, what
more reason do you need? ;)
And reverse engineering is fun. ;)
--
Phil.
classiccmp at philpem.me.uk
http://www.philpem.me.uk/