Making Fontpanel Labels

Another method is to print the artwork for the panel out using a laser printer, not inkjet, and then iron it on. You don't even need to cover the finished artwork with a clear coat afterwards as it is quite a tough finish by itself. See this page .. http://www.fullnet.com/u/tomg/gooteepc.htm .. about half way down, the component layout for a board has been done using this method. I've used draughting film, like tracing paper but heavier, as that doesn't leave fibers embedded in the toner. It's an easy method to try out if you have a laser printer and an iron, best bit is if you do screw it up you can clean it off and try again, though without solvent cleaning it off can be hard work. Lee. . ___________________________________________________________ How much free photo storage do you get? Store your holiday snaps for FREE with Yahoo! Photos http://uk.photos.yahoo.com