On 10/4/2020 4:00 PM, Chuck Guzis via cctalk wrote:
On 10/4/20 1:50 PM, J. David Bryan via cctalk wrote:
<snip>
I don't believe that
you're missing anything. When I process these
files, I mask off the lower 24 bits as the block length. A 16MB tape
block is impossibly large in any case.
--Chuck
Oil logging tapes write 9 tracks with no inter record gaps or file marks
till EOT.? I'm guessing you've not digitized any of those?
A friend built a custom machine which could be placed on site at the
well site.? The tapes would be run to the unit, and then the data stream
transmitted to a US based location for analysis.? Made necessary in
Canada as they became very aggressive about transmission of such data.
In the 70's and 80s when this was in use it was very difficult to
transport half inch tapes across the border w/o being challenged because
customs was tipped off that the tapes were all potentially banned material.
I'm surprised that they have not turned up since they are useful for
wells when trying to enhance output.
Thanks
Jim