27 Apr
2002
27 Apr
'02
6:01 p.m.
"Zane H. Healy" wrote:
After turning off auto-boot you need to type 'reset' and hit return, this is
true on both Ultra 1's and 2's. If the auto-boot is already off, you still
need to do a 'reset' before doing teh probe-scsi/probe-scsi-all.
Zane
Well, the RRD42 worked fine externally, so I tried it internally. No
good. So, as I was disconnecting it, the plastic (?) ribbon cable
started to tear away from where it connects to the HDD cage! That would
explain why the PROM never saw any internal SCSI drives!
Time to stick my CD in a SCSI case...
--
--- David A Woyciesjes
--- C & IS Support Specialist
--- Yale University Press
--- mailto:david.woyciesjes@yale.edu
--- (203) 432-0953
--- ICQ # - 905818
Mac OS X 10.1.2 - Darwin Kernel Ver. 5.2: Fri Dec 7 21:39:35 PST 2001
Running since 01/22/2002 without a crash
> try
to describe the scsi bus and termination.
> do a probe-scsi and a probe-scsi-all...
>
> let me know what that does.
I'm pretty sure that there is a Sun screwup in the Ultra1 boot ROM such
that "probe-scsi" doesn't work right when "auto-boot" is
enabled.
auto-boot?=false