HSC90: who knows what K.ci status 111 means?

Hi, few days ago I moved my HSC90 into the basement and today I changed the power-plug to a 4-prong household kind, plugged it in and it actually powered up. I could even boot it from the RX33 disk that had been sitting for years on a scrap yard. All good news. But seems like I have a serious error in the CI "host adapter" and the HSC User Manual doesn't say anything about it. the K.ci fails DIT with status 111. SHOW ALL says that K.ci was not detected. The three boards show the follwing lights: | R | R R 1 2 3 where "R" marks a red LED and | marks a row of yellow LEDs. Notably the green LEDs underneath the red ones don't come on whereas they do come on on all the SI interfaces. Knowing that the CI is finnicky with unterminated ports I did connect all four to the star coupler. But it didn't change the error. Are my cards broken? I hope there's some other oversight that can be uncovered with the deciphering of the status 111. Thanks, -Gunther -- Gunther Schadow, M.D., Ph.D. gschadow(a)regenstrief.org Medical Information Scientist Regenstrief Institute for Health Care Adjunct Assistant Professor Indiana University School of Medicine tel:1(317)630-7960 http://aurora.regenstrief.org