BSD 4.3 on a uVAXII

All, I've been wrestling to get BSD 4.3 Quasijarus installed on my uVAX2. This is what I'm doing... 1) Booting over the network to NetSBD over NetRoot 2) Used NetBSD to partition and format the disks 3) Used the 'restore' command to extract the 'dump''d root 4) Used tar to extract the proper usr (and other) directories 5) Edited the local disk's fstab ... where I'm getting hung up is bootblocks. What boot blocks do I write to my drive and how? I have an Emulex controller (MSCP emulator) with a SCSI disk attached. The disk shows up as SCSI ID 1, and dua1 from the prom. It shows up as /dev/ra0 in NetBSD. I can mount/unmount the drive, etc. I tried the NetBSD 'installboot' with 'raboot' as the bootblock and it doesn't work with the output below... 2..1..0.. ?06 HLT INST PC = 00100529 Not sure what's going on. Any ideas? -- -Jon Jonathan Katz, Indianapolis, IN.