6 Sep
2015
6 Sep
'15
5:26 a.m.
I am the original poster, I have two planes of cards, not 1. my link
pointed to a page with a thumbnail photo of one of the two planes, but
below that are links to more pics
http://vintagecomputer.net/digital/TU10/
Bill Degnan
twitter: billdeg
vintagecomputer.net
On Sep 6, 2015 8:18 AM, "Jay Jaeger" <cube1 at charter.net> wrote:
On 9/6/2015 3:15 AM, Eric Smith wrote:
Of course. Mine is set up that way - both in the same 19" rack (plus a
PDP-11/05 and a DECCassette drive and other stuff I could fit it). But
remember that the original correspondent at first mentioned only ONE
backplane (singular), so I thought it prudent to point this out lest he
connect the TU10 to the UNIBUS with heaven only knows what bad things
could happen results. Once he read my note, he provided more info which
did indicate he had two different backplanes.
JRJ
On Sat, Sep 5, 2015 at 7:54 PM, Jay Jaeger
<cube1 at charter.net> wrote:
cabinet.
Just to be clear, a TU10, even a master, does NOT
connect directly to a
PDP-11. Instead, a cable of the same general ilk as a BC11 UNIBUS Cable
(but I have not verified it is in fact the same kind of cable) connects
the drive to the TM11 controller.
That's true, but a TM11 controller can be installed in the TU10 master