PDP8/e front panels.

-----Original Message----- From: cctalk [mailto:cctalk-bounces at classiccmp.org] On Behalf Of Dave G4UGM Sent: 06 June 2015 21:48 To: 'General Discussion: On-Topic and Off-Topic Posts' Subject: RE: PDP8/e front panels. Rob, How much in the UK Dave > -----Original Message----- > From: cctalk [mailto:cctalk-bounces at classiccmp.org] On Behalf Of > Adrian Stoness > Sent: 06 June 2015 14:39 > To: General Discussion: On-Topic and Off-Topic Posts > Subject: Re: PDP8/e front panels. > > pic? > > On Sat, Jun 6, 2015 at 5:13 AM, Rod Smallwood > <rodsmallwood52 at btinternet.com > > wrote: > > > Hi All > > I have recently produced a number of high quality custom > > PDP8/e front panels. > > They are full size reproductions of the original. The production > > methods are exactly as used in circa 1971. > > They are not photographs. The front has the two colours plus the > > white each done with its own silk screen and the back has the > > intense black with the clear circular areas for the lamps to shine > > through. The inks were matched and made to order. The acrylic blanks > > with the cutouts for the keys were also a custom order. > > > > I did the artwork, The four screens were made and the printing done > > by two young ladies with very good graphic arts skills at 'Squegee & > > Ink Ltd' local to me here in Newbury UK. I have some photos but > > they do not do justice to the pin sharp lines and intense colours. > > > > The panel fits the bezel and the switches on the key + lamps board line up. > > > > I have a few to sell and can do more if needed. > > Due to the custom production they will not be low cost ($95.00 + > > shipping from UK) > > > > If you are interested I'll send you a picture. My photo skills are > > not that good. > > > > Rod Smallwood > > > > > > > >