RK05 stuff (was RE: cctalk Digest, Vol 10, Issue 74)

Yep, the belts are intact and if I remove the bottom cover, I can turn the motor and spindle easily. Nope, nothing's clicking. Other ideas? -----Original Message----- From: cctalk-bounces(a)classiccmp.org [mailto:cctalk-bounces@classiccmp.org]On Behalf Of John Lawson Sent: Sunday, July 18, 2004 12:01 AM To: General Discussion: On-Topic and Off-Topic Posts Subject: RE: RK05 stuff (was RE: cctalk Digest, Vol 10, Issue 74) Belts intact? Interlock switch good? Take the bottom cover off - can you spin the pack by hand? Ie, are the spindle bearings free? IIRC, the RK05 will spin a pack w/out being connected to anything, as opposed to RL0x drives that want to see valid clock coming from the controller. I could be mistaken about this - my RK-experience is nearly 5 years old now. Ummm... also ISTR a fairly large relay back near the linear actuator that turns the spindle motor on... is this clicking? Time to get out the Volts Guesser and a handy Schematic.... Cheers John