Transputer documentation required

Tony, For the record, I've: 3 Gemini GM8101 T800D/20 1 Gemini GM8104 T800D/20 (graphics) 1 Gemini GM8401 (link adapter) 1 Transtech TMB04 T800D/20 + 2 size one T800D/20 TRAMs 2 Sundance ST101 T800D/20 and T805D/30 1 Microway Monoputer2 T800D/20 A GM8101 has 5 sets of jumpers (1 to 3 jumpers per set) and a DIN41612 edge connector (64pins in 96 shell). I've got the edge connector sussed but not the jumpers, except for the three labelled LNK2 which set the clock rate of the T800. The TMB04 has 10 (3pin) jumpers and 20 dip switches (in blocks of 8,4,8). The edge connected is a D37 but I've a hedgehog for it. So again, I understand the connector. The Monoputer2 has a 20way(?) berg into which is plugged a tiny hedgehog. Again its the jumpers I'm lost on. This appears to be different to your Monoputer C. A ST101 has a number of dip switches and a few jumpers (may be wrong here) and a D25 connector. I've not got the pinout for the connector. The GM8104 has no connector so I would assume that its meant to be used with the GM8401 link adapter, which is a 25way D. This is what I've 'discovered' for the GM8101 connector. Don't have them with me at the moment, so a list to follow, maybe 10 or so. Doug.