Hmm, okay. That means mine's broke then.
I powered it up, pack in place, heads retracted.
The fan comes on, the "READY" lite comes on,
but it doesn't sound like it's spinning up.
No "FAULT" lite.
I pull the pack (heads still retracted), and
turn it on whilst fooling the pack inserted/door closed
switch. The spindle turns *very* slowly, and then
stops.
With the rear cover off, it looks like it does the same
thing with the pack inserted, and cover closed.
I haven't plugged this thing into a live host interface
yet; I'm just trying to see if everything's okay first.
I read somewhere that it gets it's spindle motor clock
from the RLV12/11).
Jeff
On Fri, 13 Oct 2000 10:04:26 -0400 Jerome Fine <jhfine(a)idirect.com>
writes:
Jeffrey l
Kaneko wrote:
I realize this falls into the category of stupid
questions, but:
The RL02 has to be plugged into a *live* RLV12
before it will spin-up, right?
Jerome Fine replies:
NO! But the RED FAULT light will be ON if the RL02 is
not plugged into the RLV12 (or RLV11) and the CPU is
not powered on.
Sincerely yours,
Jerome Fine
________________________________________________________________
YOU'RE PAYING TOO MUCH FOR THE INTERNET!
Juno now offers FREE Internet Access!
Try it today - there's no risk! For your FREE software, visit:
http://dl.www.juno.com/get/tagj.