9 Mar
2005
9 Mar
'05
9:28 p.m.
Ethan Dicks declared on Thursday 10 March 2005 12:12 am:
On Wed, 9 Mar 2005 23:32:29 -0500 (EST), der Mouse
<mouse at rodents.montreal.qc.ca> wrote:
If it's just because he nuked the board with an overvoltage from the P/S,
there's actually a good chance that it'll fix things. I've done it
before. I'm sure it won't fix all problems, but electronics missing the
'magic smoke' it may help with.
Pat
--
Purdue University ITAP/RCS --- http://www.itap.purdue.edu/rcs/
The Computer Refuge --- http://computer-refuge.org
For that matter, I'm in a similar situation:
I have a Maxtor which
reports itself as having 0 heads, 0 sectors/track, and 0 cylinders;
if I had an identical drive, I'd try swapping boards, but I don't.
Board swapping is unlikely to help. Unlike classic drives, modern
drives put their internal 'firmware' (more like DECmate 'slushware')
on factory tracks. Maxtors are prone to amnesia when they can't read
those factory tracks, or the data on them has been corrupted. The
drive geometry, etc., is _not_ stored in the board.
I have an 80 GB drive sitting on a bench in Palmerston North, NZ,
because of this problem...