19 Apr
2000
19 Apr
'00
7:42 a.m.
On Tue, 18 Apr 2000, Richard Erlacher wrote:
You do not have to explain it to me, I've done it, have working examples!
Allison
Please see itemized comments below.
PLEASE EDIT YOUR MESSAGES, IF I CAN ON A SLOW TELNET LINK YOU CAN!
Didnt' say
you didn't need the latch only you didnt need an extra FF to
track the silo status.
it's just one D-flip-flop, which, for the writes, is implemented as a shift
register that shifts out the write strobe a clock tick after the high byte
is written to the IDE. It also generates the OE* to both registers. For
reads, the negative-going read strobe enables the buffers' outputs and the
inverted read strobe clocks the registers.