HP Amigo command set and HFS disk format

At 10:10 PM 5/3/03 -0700, Frank McConnell wrote: After thinking about it, I think you're right. I had forgoteen that I had borrowed most of this book from a local dealer and copied it. It's titled "HP's 3 1/2-inch Flexible Disk Drive Service Documentation". This book seems to be designed to include all of the floppy drive manuals in one book. It has tabs for several items including the 9114, the command set docs and one with a manual titled "Section 1, The 3 1/2-inch Disk Drive". That section covers the bare drive used in most of these drive units. As I recall you had to order each section of the manual seaparately and you got an appropriate tab with each section that you bought. Most sections look like they were written seaparately so that they could be added into any appropriate drive manual. I also have sections that I don't have tabs for. One of them is for the HP 9123, another is for the floppy disk drive section of the OLD WIDE HP 9133 and another is for the HP 9121 drives. FWIW I ordered the 9114 SM from HP and it cost about $50! AND it wasn't very complete. It had no service info on the bare drive. I think the search for that is what lead me to the local HP dealer (probably THE last independent HP dealer.) He didn't have the 9114 docs but wanted them so I made a copy of them for him and copied everything else that he had in his book. BTW while looking at this manuals while replying to this I found a dection in the 9114 manual that says that it respondes to the SS-80 and FILBERT protocalls. I've heard some people on the HP Museum website say that Filbert was the code name of the 9114 during developement but it appears that it's a protocall and not a code name. Thanks for scanning and posting the command set docs. That's something that's been needed for some time. Joe