Looking for details on battery-backup ECO for IOB-6120

Hi, all, I've posted on the Spare Time Gizmos Yahoo Group, and I've written Jim Kearney twice and no responses yet - I have a couple of IOB-6120s that, due to the nature of the ECOs, I haven't yet installed SRAM on. I'm having problems with the fix between the 74ACT138 and the BQ2201 - what instructions I do have say to lift certain pins before installing both chips, and I've done that; what I'm lacking is the specific directions about how to connect the two with a green wire (where it goes, possible track cuts, etc). I have the directions for the resistor-and-FET fix to the SRAMs themselves. I've decided to skip the 1/8W 10K resistors in favor of 1206 SMT resistors mounted flush to the SRAMs (I'm worried about snagging something and busting off a pin). Unfortunately, without the BQ2201 portion of the fix, my IOB-6120 is somewhat inert. Thanks for any pointers, -ethan P.S. - I already have the info at http://www.jkearney.com/sbc6120/kit-A.htm