6 Dec
2013
6 Dec
'13
2:39 p.m.
-----Original Message-----
From: cctalk-bounces at classiccmp.org [mailto:cctalk-
bounces at classiccmp.org] On Behalf Of Robert Jarratt
Sent: 06 December 2013 22:11
To: 'General Discussion: On-Topic and Off-Topic Posts'
Subject: RE: HP-150 Touchscreen
elsewhere,
I have found 2 designs. the older one will comea
apert almost
completely, the levers are held on by circlips. The later one has
thigns riveted in place. With the fomer, take it apart and clean all
the bits with propan-2-ol. With the later, unhook the springs, saak
the parts (particularly the right hand side plate) in propan-2-ol,
work the levers back and forth and wipe off the grease as it emerges.
Tony,
Mine has circlips. I have taken these off and refitted them before but here I am having a devil of a job to put them
back. Is there a trick
to this?