14 Jun
2015
14 Jun
'15
2:28 p.m.
(Both boxes are running Linux; one is the host for my SIMH TOPS-10
system, the other for KLH TOPS-20. Now I have to figure out how to
tickle them into giving a serial port login; it seems I'd forgotten
the last time I set them up they must have been configured to go
straight into X, so now the boot ends with...
Master Resource Control: runlevel 5 has been reached
Skipped services in runlevel 5: personal-firewall.initial
personal-firewall.final
INIT: Id "1" respawning too fast: disabled for 5 minutes
INIT: Id "2" respawning too fast: disabled for 5 minutes
(repeat indefinitely)
rather than a login prompt! Grrrrrrr... one thing after another!
Thanks for help.)
Mike
On Mon, Jun 15, 2015 at 9:22 AM, Mike Ross <tmfdmike at gmail.com> wrote:
Sorry, didn't notice I'd replied to an email
rather than the list.
From last night:
OK I'll have to get to the bottom of this at some point, but it seems
it WAS the cable! Tried another one and, at 9600....
$$$$$ WARNING : No Keyboard Detected! $$$$$
MMU Context Table Reg Test
MMU Context Register Test
MMU TLB Bit Pattern Tests
D-Cache RAM Write/Read Test
D-Cache PTAG Write/Read Test
D-Cache STAG Write/Read Test
I-Cache RAM Write/Read Test
I-Cache PTAG Write/Read Test
I-Cache STAG Write/Read Test
EMC/SMC Control Regs Tests
How in hell a *cable* can result in garbage beats me. I would expect
data, or no data - not garbage data...
On Mon, Jun 15, 2015 at 3:41 AM, tony duell <ard at p850ug1.demon.co.uk> wrote:
--
http://www.corestore.org
'No greater love hath a man than he lay down his life for his brother.
Not for millions, not for glory, not for fame.
For one person, in the dark, where no one will ever know or see.'
--
http://www.corestore.org
'No greater love hath a man than he lay down his life for his brother.
Not for millions, not for glory, not for fame.
For one person, in the dark, where no one will ever know or see.'
I'm
trying to resurrect a couple of Sparcstation 10 systems. Is there
anything 'funny' about the serial console settings on SS10 hardware? I
thought they always defaulted to 9600-n-8-1, but I get voluminous
gobbledygook at that, and at every other baud rate I've tried.
Both systems behave identically, so I can't assume SS10 settings are
wrong. And I *am* getting data, so I don't see how it can be the
cabling. Something strange about the terminal emulation mode required
maybe?
Did they both come from the same place? It is possible (I guess) that
parameters were changed to meet a local 'standard', and thus both
machines are configured identically, just not the normal way.
From the FAQ I've looked at, the serial port is a DB25 with the 'A'
port on on the primary channel and the 'B' port on the back channel.
If so, at least you've not got the classic problem of wiring up an
RS422 port and using the wrong data pin (and thus getting inverted
data, including the framing bits, which really confuses the receiver).
I don't know if it's implemented here, but the FAQ suggests that pin 24
will carry a baud rate clock. Have you tried a 'scope there? If so, what do
you see, and what frequency?
-tony