if you have a scanner, you could turn them into a PDF :) I was just trying
to be helpful....
At 02:38 PM 11/29/01 -0700, you wrote:
I've got several copies. No need to pay 60 cents
per sheet. If copies are
needed, I'll get them made for you at whatever the local minimum is, probably
about 5 cents/page, though I haven't used Kinko's in a few years.
Dick
----- Original Message -----
From: <geoffr(a)zipcon.net>
To: <classiccmp(a)classiccmp.org>
Sent: Thursday, November 29, 2001 1:57 PM
Subject: Re: Re: Ampro Littleboard problems..
>
>
http://njcc.com/~hjohnson/s_drives.html
>
> Has the manual for sale, 30 pages @ 25C a page....
>
> > On Wed, 28 Nov 2001, Gene Buckle wrote:
> >
> > I've got a Littleboard I'm tring to bring up. When I feed it a disk,
> > and power it up, it will select the drive, spin it and shut down after
> > about 3 to 5 seconds. I never hear a head step. Nothing shows up on the
> > serial port (port a, 9600). The drive I'm using is a Teac FD-54B-02-U
> > and the two jumpers are set to DS0 and IU.
>
>
>