Some Commie questions

Message text written by INTERNET:classiccmp@u.washington.edu mode. if you type GO64, it reverts to a C=64 kernal.< You can also hold down the Commodore key (looks like "C=" in the lower lefthand corner) while you turn it on, and it will come up in 64 mode. pin DIN video connector that provides composite, or seperated video plus sound.< The 128 has an 8-pin DIN connector, as do the later 64s. A 5-pin cable will work, but for the best possible separated composite picture, an 8-pin cable will do better. monitor for 80 col. for the 1702, you need a video cable(looks like you have this), and use the separated mode for sharper graphics.< The 1702 is composite only. Later Commodore monitors, like the 1902, were composite/RGB switchable. However, pin 7 of the 9-pin 128 video connector puts out a monochrome composite signal, which (with your own hacked cable) allows you to view the 128's 80-column signal (normally viewable only with an RGB monitor) on a composite monitor like the 1702. Or GEOS, which is kinda like Windows. Some of the more advanced Commodore software (like the fax program) runs under GEOS. supply? I got two of them yesterday, both powersupplies are dead. It looks like the 5V line is shorted to ground. << The 64 power supply isn't going to do him much good on a 128; the power supplies have different connectors, and the 64 supplies aren't as strong as the 128 supplies. As to potted supplies, I have fixed one or two; some have fuses up close to the top of the gunk, and it is possible to scrape away enough of the gunk on each end to bypass the fuse if that is the problem. But as to whether it is worth the effort, I'd agree-- usually it isn't. I'm not sure what they pot it with, but starships could use it for deflector shields! Gil Parrish 107765.1161(a)compuserve.com