25 Jul
2004
25 Jul
'04
1:34 p.m.
Thanks to both of you, I happened to have that MicroPDP book but failed to
look. BTW, it did say that there was no cabinet kit for the AXV11 so I
guess you build your own..
Doug
At 10:44 PM 7/22/2004, you wrote:
Douglas Taylor wrote:
As you can tell from the heading I have one of
these boards. In the DEC
Micronotes there are some simple programs that show you how to acquire
data with it, however I don't know how you connect the board to outside
sources for sampling,etc. Anyone have info? I think I saw something in
the Vax 4000/200 manuals that talked about a cabinet kit for this board -
a UDIP - does this ring any bells?
Doug
The Micro PDP Handbook says that the connector is a 26 pin header. From
the layout it must be an 8 channel differential A/D or a 16 channel single
ended A/D.
pin
1 ch0
2 ch8 or return 0
3 ch1
4 ch9 or return 1
5 ch2
6 ch10 or return 2
7 ch3
8 ch11 or return 3
9 ch4
10 ch12 or return 4
11 ch5
12 ch13 or return 5
13 ch6
14 ch14 or return 6
15 ch7
16 ch15 or return 7
17 analog ground
18 AMP (I don't know what that means)
19 external trigger in
20 digital ground
21 real time clock in
22 digital ground
23 DAC A return
24 DAC A out
25 DAC B return
26 DAC B out