WTD: 0.156in 2x10 or 1x10 edge connector for Motorola/Displaytek M1000-355 CRT

Hi guys, I just picked up a Motorola M1000-355 CRT monitor (5in diagonal open-frame industrial "thing", circa Jan 1987 so almost as old as I am!) at the hamfest today.. Problem is, I don't have a suitable mating connector for the card edge connector... It's a 10-pin single-row card edge connector, with a 0.156in pin pitch, although I suspect a dual-row (20 pins total, 10x2 layout) would work fine too. These are listed as "US stock only" or "Discontinued, obsolete" by every supplier I've tried... Does anyone have one squirrelled away in a box somewhere which I could buy or have (he says with a cheeky grin) ? Or possibly a lead on a source for one or two of these, ideally with keypins (but the latter isn't essential)? I'd also rather like a copy of the datasheet for the monitor module if anyone has it... I have a pinout (it's the standard 10pin pinout as posted by Tony Duell quite a while ago -- IIRC either the Kaypro or Osborne monitor uses the same pinout) and a sneaking suspicion that it's CGA-spec, but no hard proof. I do know that it pulls 12V DC at about an amp -- the first value is printed on the PCB, the second was provided by the meter on my bench supply! Cheers, -- Phil. classiccmp at philpem.me.uk http://www.philpem.me.uk/