9 Jan
2002
9 Jan
'02
7:40 a.m.
I use the Xilinx XC9500 family of CPLDs. They are 5 volt
and come in PLCC packages. (You can socket these and
even get wire wrap sockets.)
The design software is free and the programming is
simple. The official download cable is $95 but I have
built several for under $15. (Xilinx publishes the
schematic.)
You can find links to the Xilinx web site plus a design
example (floppy disk controller) on this web page.
http://home.attbi.com/~swtpc6800/
-------------------------------
Michael Holley
swtpc6800(a)attbi.com
www.swtpc.com
-------------------------------
Hello, all:
Well, I'm picking up the 6502 SBC project that I started last year.
To reduce chip count I'd like to use Atmel PLDs for address decoding. I
downloaded some app notes from Atmel's web site but are there any practical
tips for using/programming these devices for use in a hobbyist project?
Rich
==========================
Richard A. Cini, Jr.
Congress Financial Corporation
1133 Avenue of the Americas
30th Floor
New York, NY 10036
(212) 545-4402
(212) 840-6259 (facsimile)