5 Jul
2000
5 Jul
'00
5:39 a.m.
John:
I have a vaxstation 2000 hooked to a VRM17-AA monitor
which seems to be happy with the signal. The monitor
mode switch is set to "low scan", which, according to
http://www.monitorexpress.com/encyclopedia/digital.html
is 1024x768 @ 72Hz. I would not be surprised if this
worked on the microvax too.
Carlos.
John Allain wrote:
Hi,
This weekend I was playing with a microVAX-II GPX
and had good luck using a spare console to do
Some things on it, most esp. booting it up fine.
However, It seems to be running VMUnix, and I
probably should get a monitor on to it to see what's
going on (headless right now). The console seems to
only control the low-level HW, not the O/S.
An old Apple mono NTSC monitor sorta-almost could
display the video, but it was a pretty sad affair.
Again, anyone out there know what monitor freq & scan
this guy wants to talk to? Mono BNC on the cable.
John A.
--
Carlos Murillo-Sanchez email: cem14(a)cornell.edu
428 Phillips Hall, Electrical Engineering Department
Cornell University, Ithaca, NY 14853