CCmp Device Programmer (was: Re: Looking...)

Guys, Damn, how come anything I say always ends up in these insanely lengthy discussions? :) Although I can see why there would be a problem with "smart" devices like PLDs et al, why dont we hide such smartness in firmware that is executed by the processor of the programmer? What I would like to see is a device that can be talked to using one of (serial|parallel|usb) methods (so pretty much any platform of any age can talk to it), and which can be told what to do using a sort-of standardized (ASCII-based) language: Start sending data please, end with . on single line. [some recognized data format flies by] . Programming 27C512 ... 100% We separate the various parts of the problem. We no longer care about HOW to talk to it. You choose. We also no longer care HOW the data is formatted. Send it, and the firmware will bitch at you if you're sending an MPEG movie :) The real trick would be the logic behind the UPLOAD command, which of course is the part where the stuff we sent to it will be sent to the device- EPROM, EEPROM, whatever. Based on the selected device type, this will use one of its algorithms to write to it. Although not perfect, wouldn't this solve most of the probs with platform dependentness and so on? Yes, for the smart device you still need to use the vendor's preparation tools to generate the bits that have to be stuffed into the dev, but at elast once that is done, you can use this thingie to actually do that. Anyone here with decent microcontroller experience ? :) -- Fred N. van Kempen, DEC (Digital Equipment Corporation) Collector/Archivist Visit the VAXlab Project at http://VAXlab.pdp11.nl/ Visit the Archives at http://www.pdp11.nl/ Email: waltje(a)pdp11.nl BUSSUM, THE NETHERLANDS / Mountain View, CA, USA