9 Jul
2009
9 Jul
'09
9 a.m.
On 7/9/09, Brian Lanning <brianlanning at gmail.com> wrote:
I also picked up a rare and elusive kung-fu black
terminator for the
IIfx. So I should be able to attach the 600e to that machine and get
it going.
I tried to look that up and found it easy to see that the IIfx needed
something odd (I couldn't find specifics), so well done there. It
would be interesting to get the details to see where Apple went off
the rails from the SCSI spec.
Then I would only need to find an AUI to RJ-45
doodad
which is skinny enough to fit into the recessed ports on the IIfx. I
have an AUI thingy now, but it's too fat to reach the db-15 connector
on the network card.
http://lowendmac.com/ii/macintosh-iifx.html
Are you sure that's an AUI connection? I would expect a Mac of that
vintage to have a DA-15 for video but not Ethernet. Does it have 4-40
screwposts or stud-heads to receive a slide-lock clip? I've never
worked with a IIfx, but I would expect it to need a NuBus Ethernet
card.
If it really is an AUI, what was also common in the day was an AUI
cable to the transceiver. I've seen plenty of heavy-duty ones from
back in the 10Base2 days and lots of light-grade 1m to 2m-long thinner
cables with molded black plastic ends that look suitable for
office/desktop use.
<http://www.blackbox.com/Store/Detail.aspx/Ethernet-Transceiver-Cable-Office-Environment-10-ft-3-0-m/LCN210-0010>
And some info...
<http://www.ethermanage.com/ethernet/10quickref/ch3qr_7.html>
-ethan