17 Jun
2000
17 Jun
'00
10:52 p.m.
Greetings,
Thanks for the help with the 1000E's PSU!
On 17 Jun 2000, Frank McConnell wrote:
[...]
board your power supply is missing is p/n 5061-1349,
the battery
backup board, which is only present in 1000Es with the battery
Good; I won't have to go hunting down a missing board. :-)
backup option. To confirm this, there should be
another board,
[...]
I'll look for this.
Looks like the installer is expected to adjust the
power supply with it
installed in the computer. Test points are on the crossover assembly
Just to be on the safe side, I'll try it out of the computer first if
it will work with no load just to make sure that there aren't any bad
spikes or voltages way too high - using something else to load it if
necessary. If ok, then I'll reinstall the PSU and make any necessary
adjustments.
[voltages, test points, adjustments]
Ok, I'll check those to see which ones aren't working or are out of
spec., if the fans are running, etc.
Feel free to ask questions, I'll keep the manual
out for the next few
days.
Will do. Thanks!
--
R. D. Davis
rdd(a)perqlogic.com
http://www.perqlogic.com/rdd
410-744-4900