8 Dec
2018
8 Dec
'18
9:43 a.m.
On Sat, Dec 8, 2018 at 1:55 AM Rod G8DGR <rodsmallwood52 at btinternet.com>
wrote:
Nice try Josh - close ? you have to change the
crystal first and you
can?t get them.
https://www.mouser.com/ProductDetail/ABRACON/AB-196608MHZ-B2?qs=sGAEpiMZZMu…
Rod Smallwood - Digital Equipment Corporation 1975 ? 1985
Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for
Windows 10
*From: *Josh Dersch via cctalk <cctalk at classiccmp.org>
*Sent: *08 December 2018 06:36
*To: *General Discussion: On-Topic and Off-Topic Posts
<cctalk at classiccmp.org>
*Subject: *Re: PDP-8/e
On Fri, Dec 7, 2018 at 10:29 PM Rod G8DGR via cctalk <
cctalk at classiccmp.org>
wrote:
Unless you have an oddball SLU, this is not true -- what do you have
installed? The earlier M8650 and the later M8655 can both be jumpered for
higher baud rates.
- Josh
It can only do 110 baud !!
Sent from Mail for Windows 10
From: Pete Turnbull via cctalk
Sent: 08 December 2018 03:15
To: cctalk at classiccmp.org
Subject: Re: PDP-8/e
On 07/12/2018 17:46, Jon Elson via cctalk wrote:
> On 12/07/2018 11:38 AM, Rod G8DGR via cctalk
wrote:
>> Oh good how do you set them to 110 baud?
>>
> Oh, WOW! Good catch, it only goes down to
300 baud! major screwup,
> ought to be reported to the developers.
But wouldn't it be better to set the serial
card in the PDP-8/E to
something faster anyway? Although on one of the
serial cards, that
requires a crystal change, so though commonly
done, may not be practical
for Rod.
--
Pete
Pete Turnbull