23 Jul
2018
23 Jul
'18
4:02 p.m.
Christian Corti via cctalk wrote:
On Sat, 21 Jul 2018, carlos_murillo at ieee.org
wrote:
-
Under SunOS 4.1.4, the last gcc version that is
supported is 3.3.6,
but I haven't been able to build it on an IPX;? it gets to the point
where it
Not quite true:
# uname -a
SunOS azu 4.1.1 10 sun4 unknown unknown SunOS
# gcc -v
Reading specs from /ibm/usr/lib/gcc/sparc-sun-sunos4.1.1/3.4.6/specs
Configured with: ../gcc-3.4.6/configure --prefix=/ibm/usr
--program-suffix=-3.4 --with-gnu-ld --with-ld=/ibm/usr/bin/ld
--with-gnu-as --with-as=/ibm/usr/bin/as --with-cpu=v7 --disable-nls
--with-libiconv-prefix=/ibm/usr --enable-obsolete
Thread model: single
gcc version 3.4.6 This is on a SUN 4/260 with 32MB RAM.
I stand corrected, 3.4.6 is indeed that last gcc to support SunOS 4.1.x
.? I was typing from memory and I tried so many gcc versions
that I lost track.? All attempts at building gcc versions > 3.2.3 <=
3.4.6 failed because of the memory issues in the gengtype execution.?
And, the last version not to use the gengtype kludge was 3.2.3; for that
version the build process advances further,? but it fails when building
libstdc++ with xgcc? (the file is bitset.cc).
Thanks for the suggestion; I'll need to learn how to build the
cross-compiler.? Do you have any quick advice on how to go about it?
carlos.
starts running gengtype and eats all memory
available (I have 64MB
RAM and have added as much as 1024 swap and it still crashes).? So,
for the time
Yes, there are such issues. The solution is to cross compile it with
distcc.
Christian