Interesting, My CSC Hard Drive Bible VIII indicates there are 3
different 8438 drives.
My book says
8438/8438F, 32 Megs formatted, 4 heads, 615 Cyl, 26 sectors,
68/40 MSecond timing RLL
Then there is a third
8438XT, 31 Megs formatted, 4 heads, 615 Cyl, 26 sectors, 68
MSecond timing XT-IDE
As to the Western digital 1002A-WX1, it is an 8 bit MFM controller
for two hard drives only. The default jumpers are W3, W4-2 & 3, W6-2 7
3,W8-2 & 3, S1-8 (AT mode) To format use G=C800:5 as you already know.
Hope this helps.
Doesn't the Model 30 have a built in disk controller that you have to
disable is use an ISA disk controller? I think there is IDE on the
motherboard. You might need the actual PS2 setup disks for the model
30. Is yours a 8086 or 80286 model 30? Most of the PS2 line had their
own set up floppy disk.
Paxton
--
Paxton Hoag
Astoria, OR
USA