17 Nov
2010
17 Nov
'10
4:03 p.m.
-----Original Message-----
From: cctalk-bounces at classiccmp.org [mailto:cctalk-bounces at classiccmp.org]
On Behalf Of rachael at telefisk.org
Sent: 17 November 2010 23:31
To: General Discussion: On-Topic and Off-Topic Posts
Subject: Re: Installing Ultrix 4.4 on a DECstation 5000 Model 240
On Wed, 17 Nov 2010, Charles Dickman wrote:
> On Wed, Nov 17, 2010 at 2:51 PM, Rob Jarratt
> <robert.jarratt at ntlworld.com> wrote:
>> It is failing at the stage of detecting the disks with an
>> "invalid block size" error.
>>
>> I am using a CR-506 CD-ROM drive and the disks I have are RZ56 and
RZ57.
Could this be an issue with the CD-ROM not supporting 512byte blocks?
I know that microVAXen need this to install VMS, perhaps this is true
with Ultrix also.
With some drives you have to set a jumper to force it to 512byte blocks.
failing that one can always use another harddrive and transfere the cd to
with dd, then the vax will happy boot from that drive,
used that for
installing
ultrix 4.5 on my 3100.
--
Jacob Dahl Pind | telefisk.org | fidonet 2:230/38.8
That is definitely worth a try. If I don't find another solution I will give
that a go. Thanks.
Regards
Rob